The constant dripping from your shower is undoubtedly annoying. And it can also mean you’re pouring money down the drain! The shower is one of the most heavily-used appliances in your home, which means that inevitably problems may arise. If you notice that your shower head is leaking, you’ll want to get it fixed right away. While you may ultimately need to find plumbers Henderson for repairs, you can locate the source of the leak and potentially resolve the issue on your own.

 

Soak the Shower Head in Vinegar

 

Vinegar is a handy remedy for many plumbing woes, and that may include fixing your shower. Your showerhead may be leaking because of a buildup of hard water deposits. Over time, the deposits impede water flow, which forces water to seep out from the junction of the arm and showerhead or the faceplate. To start, remove the showerhead, soak it overnight to dissolve the mineral deposits, and then scrub away any residual residue before reconnecting the showerhead.

 

Check the Seals

 

A broken or leaking O-ring or washer on the showerhead can cause leaks as well. These parts normally form a tight seal between the different connections on the showerhead. Over time, they can split with old age or become hard, making water leak out. A washer or O-ring leak is most common in shower heads with a swivel connection. These types of showerheads have seals located behind the swivel assembly. If you think this issue may be the cause of your problems, remove the showerhead and replace the washer or O-ring. When you’re purchasing a new seal, take the old part to the hardware store to ensure a precise match.

 

Replace the Compression Faucet Washer

 

If you notice leaking in your compression-style shower when it’s off, the issue may be a worn washer. You can identify if the leak is coming from the hot or cold faucet by feeling the water’s temperature as it drips out. To fix the problem, start by turning off the water supply. Then, remove the faulty faucet handle and remove the cover trim to access the faucet stem, which is held in place by a hex nut. After removing the nut, you should see the rubber washer. It can usually be replaced with a new one unless the area behind the washer is too corroded. If that’s the case, you’ll need to call a plumber in Henderson.

 

While you may handle a showerhead leak on your own, Service Plus Plumbing helps if you need assistance. Contact us to get your plumbing problems under control today.